Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Panel Replacement Cost in St. Louis?
Replacing a damaged garage door panel in St. Louis typically costs $250 – $500, and most single-panel jobs fall in the middle of that range. The final number depends on the panel’s material, whether your door is a current model or a discontinued one, and how many sections need work. A free written estimate before any work begins sets the exact price.
We’re Landon Garage Door Repair, and panel replacement is one of the most common calls we take from homeowners across St. Louis. A cracked bottom section, a dented middle panel, or a section that’s pulled away from the stiles usually doesn’t mean a whole new door. It means swapping the damaged section and checking the rest of the hardware while we’re there. Our technicians have up to 14 years of experience, and we work on what you already have rather than steering you toward a new system.
Here’s what panel replacement really costs in St. Louis in 2026, what pushes the price around, and how to tell whether a repair is the smarter move than replacement.
Panel Replacement Cost Breakdown (2026)
Most St. Louis homeowners pay $250 – $500 for a single panel replacement. That range covers the panel itself, the labor to swap it, and a check on the tracks, hinges, and rollers that hold the door square. Here’s how the line items break out:
| Line item | Typical estimated range |
|---|---|
| Single panel replacement (complete job) | $250 – $500 |
| Track realignment, if the door is off track | $120 – $240 |
| Roller replacement (a full set) | $110 – $220 |
| Cable repair, if a cable is frayed or slack | $130 – $250 |
| Spring repair (per single spring) | $180 – $340 |
| Opener repair, if the damage traced back to the motor | $120 – $320 |
| Opener installation (new unit) | $250 – $550 |
| Full new door installation, if replacement makes more sense | $700 – $2200 |
Those add-ons only come into play when the damage goes beyond the panel. A clean single-panel swap sits at the low end of the $250 – $500 band. A panel on a discontinued model, an oversized custom section, or a door that also needs tracks realigned lands at the top.
What the panel type does to the price
A standard steel panel in a common color is the least expensive path and the easiest to source. Wood-look steel, insulated panels, and carriage-house styles cost more because the section itself costs more. If your door is a LiftMaster-compatible Clopay, Amarr, Wayne Dalton, Raynor, or Craftsman model, that familiarity helps us match the right section instead of guessing. We service all eight of the most widely installed residential brands, so we can talk about your specific door rather than a generic one.
What Affects Panel Replacement Pricing in St. Louis
St. Louis has a few local factors that shift the price in ways a national number can’t capture. The biggest is the mix of housing stock: older city neighborhoods have a lot of narrow single-car doors on brick garages, while newer suburbs run wider two-car doors. Each of those shapes which panel you need.
- Panel size and door width. A single-car door needs a smaller, cheaper section than a two-car door. Wider doors also take longer to square up, so labor runs a bit higher.
- Brand and model availability. Common brands like Clopay, Amarr, and Wayne Dalton are straightforward to match. A discontinued panel means either finding a close match or replacing the full set of sections.
- Material. Steel is the budget option. Insulated steel, aluminum, and wood-look panels cost more because the section itself costs more.
- Whether the damage is structural. A dented panel is one thing. A section that’s buckled because a track is bent means the panel plus realignment ($120 – $240 on top).
- Hidden damage behind the panel. If a spring or cable failed and caused the damage, that has to be fixed first. A single spring runs $180 – $340, and a matched pair is usually replaced together, so budget roughly double for a pair.
- St. Louis weather. Summer humidity and winter freeze-thaw cycles work on the door hardware year after year. Doors that have seen a lot of freeze-thaw tend to need tracks and rollers looked at alongside the panel.
The written estimate ties all of that together into one price. We don’t give a number over the phone and then change it at the door – the quote is the price.
Should You Replace a Panel or the Whole Door in St. Louis?
Replace the panel, not the door, when the damage is limited to one or two sections and the rest of the door is sound. A panel replacement at $250 – $500 is far cheaper than a new door installation at $700 – $2200, and it’s almost always the right call on a door that’s otherwise in good shape.
Full replacement makes more sense when the door is failing in several places at once. A door that needs panels plus tracks plus springs plus an opener is putting money into a system that’s near the end of its life. We can look at it honestly and tell you which side of that line your door is on. That’s the whole reason we cover both repair and installation under one name: we can give you a straight answer without angling for the bigger job.
Signs a repair is the smarter move
- One or two damaged sections, with the rest of the door straight and solid
- Springs and cables in good shape, or a problem that’s easy to fix alongside the panel
- A current or recently discontinued model where the matching section is available
- The opener still runs the door smoothly after the panel is swapped
Signs it’s time to talk about replacement
- Multiple panels damaged across the door
- A door that’s been patched more than once
- Bent tracks and worn hardware throughout
- A door-style or energy spec that no longer fits the home
How to Save on Panel Replacement in St. Louis
Panel replacement isn’t one of the trades where the price varies wildly. But a few things keep the job on the low side of the range.
- Deal with the cause, not just the symptom. If a bent track or a failing spring caused the panel damage, fixing the panel alone leaves you back at the same spot. Catching the underlying problem early keeps the total down.
- Get an estimate before the damage spreads. A small crack or loose section is a straightforward panel job. Wait, and the whole door can shift enough to need realignment too.
- Ask about a matching section, not a full replacement. On a current model, a matching panel is the cheaper route. A good technician will tell you when a matching section is realistic and when it isn’t.
- Let us check the rest of the door while we’re there. Rollers and hinges are inexpensive to swap during a panel job and much cheaper than a return visit later.
- Take the free estimate. We offer free estimates and upfront pricing, so there’s no cost to finding out what your door needs.
Door and opener, handled together, is how we prefer to work. If the panel damage traces back to the opener and we’re already there, it’s one visit instead of two.
How Panel Replacement Works and What We Check
A panel replacement means removing the damaged section, fitting the new one into the door’s hinges and stiles, and making sure the door travels smoothly on its tracks. It’s a physical job done at height with the door under spring tension, and the springs and cables are the parts that make it dangerous to work on yourself. A trained technician knows how to secure the door before touching anything. We don’t recommend DIY work on the springs or cables; they store a lot of energy, and a slip can cause serious injury.
When we’re on a panel job, we also check the tracks, rollers, hinges, and spring tension while the door is apart. It’s a good moment to catch a problem before it becomes a bigger repair. We handle garage door repair as its own service separate from opener work, so a job that crosses both is one call.
Same-Day Repair
If a panel is damaged and the door won’t shut, we’re set up to get out the same day in most cases. Call (866) 942-7683. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Brands We Service
Panel matching goes more smoothly when the technician knows the brand. We service LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor systems. That covers most of what’s on St. Louis doors. If your door is one of those, we can match the section and check the opener as a separate system at the same time.
FAQs – Panel Replacement Cost
How much does garage door panel replacement cost in St. Louis?
Garage door panel replacement in St. Louis typically costs $250 – $500, including parts and labor. That covers a single section and a check on the surrounding hardware. A panel on a discontinued model, or a job that also needs a track realignment, sits at the top of that range. Call (866) 942-7683 for a free estimate – the written quote sets the final price.
Can you come out today for a damaged panel?
In most cases, yes. We offer same-day service, and a damaged panel that’s affecting a door’s operation gets priority. Call (866) 942-7683. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Is it cheaper to replace one panel or the whole door?
One panel is almost always cheaper. A single panel runs $250 – $500, while a new door installation runs $700 – $2200. Replacement only makes sense when several parts of the door are failing at once. Call (866) 942-7683 and we’ll tell you honestly which side of that line your door is on.
Can you match the panel color and style on my existing door?
Usually, yes, on a current or recently discontinued model. Common brands like Clopay, Amarr, Wayne Dalton, and Raynor offer matching sections. On older doors, the color may have faded, so we check the match before ordering. Call (866) 942-7683 to talk through your specific door.
Does panel replacement include fixing a bent track or a broken spring?
No, a panel replacement is priced on its own, but we’ll flag those problems in the same estimate. Track realignment runs $120 – $240 and a single spring runs $180 – $340, with a matched pair usually replaced together at roughly double that for the pair. Getting it all in one visit saves a second call. Call (866) 942-7683 – estimates are free.
If your door has a damaged panel and you want a straight answer on whether it’s a repair or a replacement, call (866) 942-7683 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We work on what you already have, across all eight major brands, and we’ll give you the right fix, not the most expensive one.
Pricing reflects the St. Louis market as of 2026. Landon Garage Door Repair offers free estimates – call (866) 942-7683.
Written by the team at Landon Garage Door Repair.
What Our Customers Say
"Both cables had come off the drum and the door was hanging crooked. I'd watched a video and was about ten minutes from trying it myself, which the tech told me would have been a genuinely bad idea. Glad I called."
- Dana Ackerman"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Emily Anderson"The old chain drive sounded like a freight train through the bedroom above the garage. Went with the belt drive they recommended and now I genuinely cannot hear it open from upstairs."
- Cole Ziegler